As of August 2020 the site you are on (wiki.newae.com) is deprecated, and content is now at rtfm.newae.com.

Changes

Jump to: navigation, search

CW-Capture Tool

2 bytes added, 02:13, 26 July 2017
no edit summary
If you want more advanced setups, you will have to configure the capture environment manually using the Setting tabs, starting with the "Generic Settings":
# Select the desired "Scope Module" (i.e.: g., ChipWhisperer/OpenADC). Leave it as None if you only want to use the target.# Select the desired "Target Module" (i.e.: g., Simple Serial). Leave it as None if you only want to use the scope.# Select the desired "Trace Format" (i.e.: g., ChipWhisperer/Native). Leave it as None if you don't need to save the traces, as often happen when executing the Glitching attack.# Switch to the "Scope Settings" tab and setup your scope connection (i.e. g., selecting 'NewAE USB (CWLite/CW1200)').# Switch to the "Target Settings" tab and setup your target connection (i.e. g., selecting 'NewAE USB (CWLite/CW1200)').
# Connect to the desired scope/target pair, using the toolbar buttons. The master button connects to both at the same time.
#* At this point, you may want to flash the desired firmware to the target, using the Programmer option in the Tools' menu.
218
edits

Navigation menu