Changes

CW1173 ChipWhisperer-Lite/AVR Programmer

14 bytes removed, 20:42, 15 March 2017
no edit summary
The CW1173 has and CW1200 have built-in support for programming either Atmel AVR or Atmel XMEGA device. This is designed to allow you to program our target boards (either including the built-in XMEGA target, or the Multi-Target board).
Note this programmer is fairly simple, and ''does not'' provide all the features of a stand-alone programmer.
<blockquote>'''tip'''
; If programming a virgin ATMega328P device, the default low-fuse value of <code>62</code> results in the internal: 8 MHz oscillator being divided down to 1 MHz. Any external clock is ignored.
The low fuse byte must be changed to <code>D0</code> to use the external clock provided by the ChipWhisperer toolchain.
Approved_users
510
edits