CW1173 ChipWhisperer-Lite/XMEGA Programmer
< CW1173 ChipWhisperer-LiteRevision as of 07:09, 25 January 2017 by Coflynn (Talk | contribs) (Created page with " The XMEGA device programmer requires only two connections to the target: clock (PDIC) and data (PDID). The PDIC line is usually shared with the RESET pin, and the PDID pin is...")
The XMEGA device programmer requires only two connections to the target: clock (PDIC) and data (PDID). The PDIC line is usually shared with the RESET pin, and the PDID pin is a specific pin on the XMEGA device. See #20-Pin_Connector for details of XMEGA programming pin connections.
