As of August 2020 the site you are on (wiki.newae.com) is deprecated, and content is now at rtfm.newae.com.

Changes

Jump to: navigation, search

CW303 XMEGA Target

520 bytes removed, 20:45, 12 April 2018
no edit summary
{{:CW303 XMEGA Target/Connectors}}
== {{:CW303 XMEGA Target/Solder Jumpers == ; SJ2: Selects the source of the input to the VCC filter - either the 20-pin 3.3V VCC (default), or the optional voltage regulator which derives the power from a USB-Micro connector.; SJ3: Connects the output of the VCC filter to the XMEGA VCC network. Soldered by default.; SJ4: Connects the SMA Measure header to the resistive shunt. Soldered by default.; SJ5: Connects the SMA Glitch header to the resistive shunt. Soldered by default.; SJ7: Connects the VCC of the XMEGA board to VREF on 20-pin header. Soldered by default.}}
== Schematic ==
Retrieved from "http://wiki.newae.com/Special:MobileDiff/3240"

Navigation menu