Changes

{{Infobox cw308target|name = CW308T-ADUCM3029|image = SAM4L-Top-small.jpg|caption Page Moved = |Target Device = Atmel SAM4L|Target Architecture = ARM Cortex M4|Hardware Crypto = Yes|Purchase Hardware = |Design Files = [https://github.com/newaetech/chipwhisperer/tree/develop/hardware/victims/cw308_ufo_target/sam4l GITHub Link]

See [https://oshparkrtfm.newae.com/projectsTargets/Dkr9ybuJ OSH Park PCBsUFO%20Targets/CW308T-ADuCM3029/ NewAE RTFM Page]|Supported Applications = which is now built from the [[SimpleSerial | Simple Serial Enchttps:/Auth/github.com/newaetech/chipwhisperer-target-cw308t GIT Repo]]|Status = Released}}.

This board supports the Atmel SAM4L microcontroller. The default build has the Atmel ATSAM4LC2AA-AU, which has 128KB flash and 32KB SRAM. == Power Supply == The ADuCM3029 can run from a core supply voltage between 1.8 and 3.3 volts. By default the core is fed from the 3.3v supply but the adjustable regulator previous content on the CW308T can be used to set any viable core voltage. Sometimes power analysis is more viable at different supply voltages. == Hardware AES == The SAM4L this wiki has a hardware AES module, with optional countermeasures that can be enabled. These countermeasures are described in the SAM4L datasheet as the following options: * Type 1: Randomly add one cycle been moved to data processing* Type 2: Randomly add one cycle to data processing (other version)* Type 3: Add a random number of clock cycles to data processing, subject to a maximum of 11 clock cycles for key size of 128 bits* Type 4: Add random spurious power consumption during data processing Interestingly they can be individually enabled/disabled. This makes the SAM4L a useful training target for power analysis attacks against various hardware countermeasuresabove link. == Programming == An external programmer is needed for this target. The SAM4L has an internal bootloader See wiki history if you can use via an external serial port, which is not yet supported directly by the ChipWhisperer-Capture software. == Schematic == See GIT Repo for PDF would like to view exact older versions of schematic. == Board Layout == See GIT Repo for gerber filesthis page. == Hardware == {{Template:Hardware}}[[Category:CW308 Targets]]