Changes

{{Infobox cw308target|name = CW308T-ADUCM3029|image = SAM4L-Top-small.jpg|caption Page Moved = |Target Device = Atmel SAM4L|Target Architecture = ARM Cortex M4|Hardware Crypto = Yes|Purchase Hardware = |Design Files = [https://github.com/newaetech/chipwhisperer/tree/develop/hardware/victims/cw308_ufo_target/sam4l GITHub Link]

See [https://oshparkrtfm.newae.com/projectsTargets/Dkr9ybuJ OSH Park PCBsUFO%20Targets/CW308T-ADuCM3029/ NewAE RTFM Page]|Supported Applications = which is now built from the [[SimpleSerial | Simple Serial Enchttps:/Auth/github.com/newaetech/chipwhisperer-target-cw308t GIT Repo]]|Status = Released}}.

This board supports the Atmel SAM4L microcontroller. The default build has the Atmel ATSAM4LC2AA-AU, which has 128KB flash and 32KB SRAM. == Power Supply == The ADuCM3029 can run from a core supply voltage between 1.8 and 3.3 volts. By default the core is fed from the 3.3v supply but the adjustable regulator previous content on the CW308T can be used to set any viable core voltage. Sometimes power analysis is more viable at different supply voltages. == Cryptographic Accelerator == As described in the ADuCM3027/3029 Data Sheet<ref>http://www.analog.com/media/en/technical-documentation/data-sheets/ADuCM3027_3029.pdf</ref>, The cryptographic accelerator is a 32-bit APB DMA capable peripheral. There are two 32-bit buffers provided for data input/output operations. These buffers read in or read out 128 bits in four data accesses. Big endian and little endian data formats are supported, as are the following modes:* Electronic code book (ECB) mode—* AES mode (128 and 256)* Counter (CTR) mode* Cipher block chaining (CBC) mode* Message authentication code (MAC) mode* Cipher block chaining-message authentication code (CCM/CCM) mode* SHA-256 mode == Programming == An external programmer is needed for this target. The SAM4L wiki has an internal bootloader you can use via an external serial port, which is not yet supported directly by been moved to the ChipWhisperer-Capture softwareabove link. == Schematic == See GIT Repo for PDF wiki history if you would like to view exact older versions of schematic. == Board Layout == See GIT Repo for gerber filesthis page. == Hardware == {{Template:Hardware}}[[Category:CW308 Targets]]