As of August 2020 the site you are on (wiki.newae.com) is deprecated, and content is now at rtfm.newae.com.

Difference between revisions of "CW308T-AVR"

From ChipWhisperer Wiki
Jump to: navigation, search
Line 1: Line 1:
 +
{{Infobox cw308target
 +
|name                  = CW308T-AVR
 +
|image                  = File:P1090088.jpg
 +
|caption                =
 +
|Target Device          = Atmel AVR
 +
|Target Architecture    = 8-bit Harvard
 +
|Hardware Crypto        = No
 +
|Purchase Hardware      =
 +
|Design Files          =
 +
|Supported Applications =
 +
}}
 +
 
[[File:P1090088.jpg|600px]]
 
[[File:P1090088.jpg|600px]]
  

Revision as of 10:28, 25 March 2017

CW308T-AVR
P1090088.jpg
Target Device Atmel AVR
Target Architecture 8-bit Harvard
Hardware Crypto No

P1090088.jpg

I/O Connections

The pinout of this module matches the "NOTDuino" kit along with the "CW301 Multi-Target Board" routing. The following is the connection between GPIO1-4 and the I/O lines on the AVR:

CW308 Pin ATMega328P Pin Notes
GPIO1 PD0 (RXD) Serial INPUT to AVR.
GPIO2 PD1 (TXD) Serial OUTPUT from AVR.
GPIO3 N/C
GPIO4 PC0 Trigger pin (mapped to ADC-port such that I/O driver power comes from AVCC).
CLKIN XTAL1
CLKFB PB0 Can set this pin as CLKO with fuse. Useful for synchronizing to internal RC oscillator.
nRST nRST (PC6) Used by in-system-programming (ISP) interface.
MOSI PB3 (MOSI) Used by in-system-programming (ISP) interface.
MISO PB4 (MISO) Used by in-system-programming (ISP) interface.
SCK PB5 (SCK) Used by in-system-programming (ISP) interface.

Programming Header

The 6-pin programming heading can be used with the Atmel ISP interface. The pinout of the 6-pin programming header on the main-board allows it to work with standard Atmel ISP tools:

Avr isp.jpg

Schematic

CW308T AVR Schematic Page 1.png

CW308T AVR Schematic Page 2.png


[[Category: Targets]