Changes

CW308T-D2000

331 bytes added, 03:45, 12 July 2018
no edit summary
== Schematic ==
See GIT Repo for PDF of schematic. Note there is a new "03C" rev that changes the shunt resistor (R1) to a 1-ohm resistor. This results in a much more reliable device, as the original 10-ohm shunt caused occasional crashes. If you are using an older revision device, you can mount a shunt/jumper between "SH-" and "SH+" on the UFO board to achieve a similar effect.
[[File:CW308T-D2000-02_schematic.png|1000px]]
Approved_users, bureaucrat, administrator
1,956
edits