Open main menu

Changes

CW308T-D2000

2,633 bytes removed, 19:32, 29 July 2020
Replaced content with "== Page Moved == See [https://rtfm.newae.com/Targets/UFO%20Targets/CW308T-D2000/ NewAE RTFM Page] which is now built from the [https://github.com/newaetech/chipwhisperer-..."
{{Infobox cw308target|name = CW308T-D2000|image = d2000_topdown.jpg|caption Page Moved = |Target Device = Intel Quark D2000|Target Architecture = x86|Hardware Crypto = No|Purchase Hardware = |Design Files = [https://github.com/newaetech/chipwhisperer/tree/master/hardware/victims/cw308_ufo_target/d2000 GITHub link]
See [https://oshparkrtfm.newae.com/shared_projectsTargets/HOs4WL4l OSH Park PCBsUFO%20Targets/CW308T-D2000/ NewAE RTFM Page]which is now built from the [https://github.com/newaetech/chipwhisperer-target-cw308t GIT Repo].
|Supported Applications =}} [[File:d2000_topdown.jpg|400px]] The D2000 target is a bit of an oddball. It's an x86 target, but is really a microcontroller (internal flash etc).  == Programming == An external programmer is needed for previous content on this target. The Quark D2000 dev-board can be used with jumper wires, or a standard OpenOCD programmer can be used. The suggested programmer is the [https://mouser.com/ProductDetail/Olimex-Ltd/ARM-USB-OCD-H Olimex ARM-USB-OCD-H] as is available from suppliers such as Mouser and Digi-Key (mouser link provided). === How to flash D2000 board using OpenOCD === We'll modify the provided scripts from the Intel ISSM distribution (compiler etc for D2000). Start a Windows command prompt and run the following commands:  C:\IntelSWTools\ISSM_2016.0.027\issm_env.bat cd %ISSM_DEBUGGER_ROOT%\openocd bin\openocd.exe -f scripts\interface\ftdi\olimex-arm-usb-ocd-h.cfg -f scripts\board\quark_d2000.cfg Note we specify two script files - the first had the JTAG connection (the olimex-arm-usb-ocd-h.cfg), the second had the D2000. This should result in an output like the following:  Open On-Chip Debugger 0.8.0-dev-g7845893 (2015-11-26-18:12) Licensed under GNU GPL v2 For bug reports, read http://openocd.sourceforge.net/doc/doxygen/bugs.html Info : only one transport option; autoselect 'jtag' adapter speed: 1000 kHz trst_only separate trst_push_pull flash_rom Info : clock speed 1000 kHz Info : JTAG tap: quark_d2000.cltap tap/device found: 0x0e786013 (mfg: 0x009, part: 0xe786, ver: 0x0) Enabling lmt core tap Info : JTAG tap: quark_d2000.lmt enabled At this point it will hold, waiting for new commands. Open a second command prompt, and run:  C:\IntelSWTools\ISSM_2016.0.027\issm_env.bat gdb From within this GDB console, you can run the following:  target remote :3333 monitor clk32M 500 monitor load_image C:\\chipwhisperer\\hardware\\victims\\firmware\\intel_quark\\quark_d2000_rom.bin 0x0 monitor load_image C:\\chipwhisperer\\hardware\\victims\\firmware\\intel_quark\\simpleserial_example\\release\\quark_d2000\\x86\\bin\\simpleserial_aes.bin 0x00180000 The first load_image is used for the ROM image. This may not be needed as wiki has normally been done already. However you'll have moved to reload the application any time above link. See wiki history if you wish would like to reprogram it. == Schematic == See GIT Repo for PDF view exact older versions of schematic. [[File:CW308T-D2000-02_schematic.png|1000px]] == Board Layout == See GIT Repo for gerber filesthis page. {{Template:Hardware}}[[Category:CW308 Targets]]
Coflynn
Approved_users, bureaucrat, administrator
1,956
edits