Difference between revisions of "CW308T-EFM32TG11"

Revision as of 10:42, 22 August 2018

This board supports the Silicon Labs EFM32 Tiny Gecko 11 microcontroller. The chip mounted on the target board is the EMF32TG11B3.

The core of the Tiny Gecko chip runs from a 1.2v supply. This is supplied and filtered through the CW308T. The I/O buses are supplied with 3.3v.

The Tiny Gecko family of microcontrollers implements many security features including:

For a full list of security features see the product family data sheet^[1]

See GIT Repo for design files.

Old Hardware (see RTFM.NEWAE.COM for new)

3rd Party Targets	SAKURA-G Target • SASEBO-W Target
Test Equipment	PicoScope (USB Scope) • VISA Connected Oscilloscope
Obsolete	CW1002 ChipWhisperer Capture Rev2 • CW301 Multi-Target

@@ Line 22: / Line 22: @@
 The Tiny Gecko family of microcontrollers implements many security features including:
+* Hardware implementations of AES-128/256, SHA-224/256
+* Hardware CRC engine
+* Access control for peripherals
 For a full list of security features see the product family data sheet<ref>https://www.silabs.com/documents/public/data-sheets/efm32tg11-datasheet.pdf</ref>
@@ Line 27: / Line 30: @@
 == Programming ==
-The SAML10/11 family implements a serial bootloader. Usage of this bootloader is not detailed in the data sheet, for usage information see Microchip Application note AN2699<ref>http://ww1.microchip.com/downloads/en/AppNotes/00002699A-UART%20Bootloader%20for%20SAM%20L10%20%20SAM%20L11.pdf</ref>.
-Serial Wire Debug (SWD) is also supported for programming and debugging applications.
 == Schematic and Layout ==