== Page Moved ==
This is a basic prototype board which can be used for mounting other chips on the See [[CW308 https://rtfm.newae.com/Targets/UFO Target%20Targets/CW308T-GENERIC/ NewAE RTFM Page]]. It can also be used to mount small boards (see which is now built from the examples for photos)[https://github.com/newaetech/chipwhisperer-target-cw308t GIT Repo].
== Usage == == Examples == The following shows several examples of this board in use. === Hue Bridge 2.0 === This shows an extreme example of mounting a board onto the victim board. The actual analysis was being done previous content on the SAMR21R on the main board, but this provided mechanical stability wiki has been moved to allow tacking wires onto that areathe above link. === Hue CC2530 Based Bulb === The SPI traffic was wired out as well in this example, and a ChipWhisperer-Pro was used See wiki history if you would like to trigger on SPI traffic. === Hue ATMega2564RF2R Based Bulb === The SPI traffic was wired out as well in view exact older versions of this example, and a ChipWhisperer-Pro was used to trigger on SPI traffic. === Riscure CTF Board === This example allowed both power analysis and clock glitching to be performed against the board. A small shunt resistor is soldered in-line for the VCC pinpage. [[Category: CW308 Targets]]
