Changes

This target See [https://rtfm.newae.com/Targets/UFO%20Targets/CW308T-ATMega1284RFR2/ NewAE RTFM Page] which is for now built from the ATMega2564RFR2[https://github. This makes a great com/newaetech/chipwhisperer-target for exploring IoT technologies, such as mesh networking protocols-cw308t GIT Repo].

[[File:meagrf_render_02.png|400px]] == Programming == The ChipWhisperer's AVR programmer supports previous content on this target directlywiki has been moved to the above link. No external programmer is required. == Schematic == See GIT Repo for PDF of schematic. [[File:CW308T_ATMegaRF_02.png|1000px]] == Board Layout == See GIT Repo for gerber files. == Radio Usage == Note NO ANTENNA is provided as the board is sold only as a sub-assembly and not designed to be used as a radio transmitter. Mounting a 2.4 GHz radio antenna (SMA, NOT reverse-polarity SMA) wiki history if you would like Digi-Key P/N 1475-1014-ND could potentially require you to meet FCC/CE guidelines for RF emissions and is UNSUPPORTED USAGE. == Historical Note == The following is the original (-01) schematic. The -01 PCBs were never publicly released and used during development only. The following changes were made in -02: * MOSI/MISO was switched on Atmel device (requires PCB fix on -01, or PCB will not work)* TST connected to ground (requires PCB fix on -01, or PCB will not work)* CLKI pull down* GPIO3 is now optionally in control view exact older versions of 4066 instead of being hardwired* Serial resistors added on SCK/MISO/MOSI lines [[File:CW308T_ATMegaRF_01this page.png|200px]] [[Category:Targets]][[Category:CW308 Targets]]