== Programming Connection ==
=== ChipWhisperer Programmer via Bootloader ===
=== JTAG Programmer ===
The 20-pin JTAG port (J6 on CW308 Board) can be used with the [https://www.digikey.com/product-detail/en/stmicroelectronics/ST-LINK-V2/497-10484-ND/2214535 ST-LINK/V2] which is a low-cost JTAG programmer.
If all goes well, this command will finish by printing the output file size and the platform:
[[File:Stm32-make.png]]
=== Programming via ChipWhisperer Bootloader ===
{{:CW308T-STM32F/ChipWhisperer_Bootloader}}
=== Running ST Example with ST-Link ===
Once you've built a binary to load onto If instead of using the targetbootloader, you're ready want to program it. Plug use a ST-Link you can instead plug your programmer into the 20 pin JTAG connector (J6 on the UFO board):
[[File:Stm32-jtag.jpg|600px]]