Replaced content with "== Page Moved == See [https://rtfm.newae.com/Targets/UFO%20Targets/CW308T-STM32F/ NewAE RTFM Page] which is now built from the [https://github.com/newaetech/chipwhisperer..."
|Supported Applications =|Programmer = STSee [https://rtfm.newae.com/Targets/UFO%20Targets/CW308T-LINKSTM32F/V2}}NewAE RTFM Page] which is now built from the [https://github.com/newaetech/chipwhisperer-target-cw308t GIT Repo].
== Supported Devices == The STM32F board supports several STM32F devices in the TQFP-64 package. Various solder jumpers need to bet set previous content on this wiki has been moved to either the "A" or "B" position to select appropriate VCC supply for the different seriesabove link. The following table summarizes examples of suitable devices:{| class="wikitable"!STM32F Series!Package!Device!Hardware AES!Tested!Jumper|-|F0|TQFP-64||||B|-|F1|TQFP-64||||B|-|F2|TQFP-64||||A|-|F3|TQFP-64||||B|-|F4|TQFP-64|STM32F415RGT6|Yes|Yes|A|}=== VCC-Int Supply ===Several devices (F2, F4) have internal core voltage regulators. By default the CW308 board attempts to provide power for these pins, but the voltage may not be high enough to cause the internal regulator to disable itself. In this case See wiki history if you can use the VADJ regulator would like to ensure the internal regulator is disabled. See [[Targets with Internal Regulators]] for details.== Hardware AES ==Certain view exact older versions of the STM32F have hardware AES. For example the STM32F415RGT6 has hardware AES.== Programming Connection ==The 20-pin JTAG port (J6 on CW308 Board) can be used with the [https://www.digikey.com/product-detail/en/stmicroelectronics/ST-LINK-V2/497-10484-ND/2214535 ST-LINK/V2] which is a low-cost JTAG programmer. Other JTAG programmers (such as OpenOCD) may work.== Schematic ==[[File:CW308T_STM32F_02this page.png|1100px]][[Category: CW308 Targets]]