Replaced content with "== Page Moved == See [https://rtfm.newae.com/Targets/UFO%20Targets/CW308T-STM32F/ NewAE RTFM Page] which is now built from the [https://github.com/newaetech/chipwhisperer..."
|Supported Applications = See [[SimpleSerial | Simple Serial ENChttps:/Auth]]|Programmer = ST/rtfm.newae.com/Targets/UFO%20Targets/CW308T-LINKSTM32F/V2|Status = Released}}NewAE RTFM Page] which is now built from the [https://github.com/newaetech/chipwhisperer-target-cw308t GIT Repo].
== Supported Devices == The STM32F board supports several STM32F devices in previous content on this wiki has been moved to the TQFP-64 packageabove link. Various solder jumpers need See wiki history if you would like to bet set to either the "A" or "B" position to select appropriate VCC supply for the different series. The following table summarizes examples view exact older versions of suitable devices:{| class="wikitable"!STM32F Series!Package!Device!Hardware AES!Tested!Jumper|-|F0|TQFP-64||||B|-|F1|TQFP-64||||B|-|F2|TQFP-64||||A|-|F3|TQFP-64||||B|-|F4|TQFP-64|STM32F415RGT6|Yes|Yes|A|}=== VCC-Int Supply ===Several devices (F2, F4) have internal core voltage regulators. By default the CW308 board attempts to provide power for these pins, but the voltage may not be high enough to cause the internal regulator to disable itself. In this case you can use the VADJ regulator to ensure the internal regulator is disabled. See [[Targets with Internal Regulators]] for details.== Hardware AES ==The STM32F21x, and STM32F41x/43x have hardware crypto modules (AES, DES, TDES) along with hardware hash (SHA1, MD5).== Programming Connection ==The 20-pin JTAG port (J6 on CW308 Board) can be used with the [https://www.digikey.com/product-detail/en/stmicroelectronics/ST-LINK-V2/497-10484-ND/2214535 ST-LINK/V2] which is a low-cost JTAG programmer. Other JTAG programmers (such as OpenOCD) may work.== Schematic ==[[File:CW308T_STM32F_02page.png|1100px]][[Category: CW308 Targets]]