Approved_users, bureaucrat, administrator
1,956
edits
| As of August 2020 the site you are on (wiki.newae.com) is deprecated, and content is now at rtfm.newae.com. |
Changes
→Rev -02 Boards
# Select the "Serial STM32F Programmer"
#: [[File:arm_programmer.png]]
# Mount a jumper between the H1/H2 pins on the UFO board:(again this is ONLY for the -02 rev, the -03 and newer revision DO NOT need this jumper as the ChipWhisperer will toggle the pin).
#: [[File:samjumper.png|400px]]
# Reset the ARM device either by pressing the reset button (newer UFO boards only), or by toggling power:
