Open main menu

Changes

CW308T: Stand-Alone Simple Serial Example (AVR or XMEGA)

18 bytes added, 14:43, 1 May 2018
no edit summary
[[File:P1090078.jpg|thumb|600x600px|Example of attaching to the AVR target device.]]
== Board/Jumper Settings ==
== USB Serial Usage ==
[[File:P1090080.jpg|thumb|600x600px|Details of a possible oscilloscope connection on the trigger pin, along with a USB-serial on GPIO1/GPIO2.]]A serial connection is needed on GPIO1/GPIO2. This can be provided by any 3.3V USB-Serial cable (DO NOT use a cable which outputs either RS232 levels, or 5V levels). [[File:P1090080.jpg|600x600px|Details of a possible oscilloscope connection on the trigger pin, along with a USB-serial on GPIO1/GPIO2.]]
This can either be connected at J1 (the 20-pin ChipWhisperer header), or the pin headers directly beside the victim board. The pin headers do not provide diode clamping, where as the connections at J1 have diode clamping.
[[Category: CW308 Targets]]