CW505 Planar H-Field Probe

Usage

The H-Probe can be mated with the LNA for the best performance. This is shown below:

If using the H-Probe for SCA, you will need to place the probe on top of your target chip. For example see the following location used to attacked the XMEGA:

For more details, see the H Probe Usage tip which includes a video with details.

Design

The following shows all layers of the H-Field probe:

The following shows each individual layer:

Layer 1:

Layer 2:

Layer 3:

Layer 4:

Old Hardware (see RTFM.NEWAE.COM for new)

3rd Party Targets	SAKURA-G Target • SASEBO-W Target
Test Equipment	PicoScope (USB Scope) • VISA Connected Oscilloscope
Obsolete	CW1002 ChipWhisperer Capture Rev2 • CW301 Multi-Target