458
edits
Changes
no edit summary
= Completing Tutorial with CW1002 (ChipWhisperer Capture Rev2) = Note the following is only applicable to the use of the ChipWhisperer-Capture Rev 2 hardware (aka the CW1002). See [[#Completing_Tutorial_with_CW1173/CW1200]] if you are not using this hardware. == Setting up the Hardware ====
This tutorial uses the [[CW1002_ChipWhisperer_Capture_Rev2]] hardware along with the [[CW301_Multi-Target]] board. This hardware is the standard setup for all basic tutorials.
</blockquote>
==== Setting up the Software ====
It is assumed that you've already followed the guide in [[Installing_ChipWhisperer]]. Thus it is assumed you are able to communicate with the ChipWhisperer Capture Rev2 hardware (or whatever capture hardware you are using). Note in particular you must have configured the FPGA bitstream in the ChipWhisperer-Capture software, all part of the description in the installing guide.
==== Programming the Example ====
<ol style="list-style-type: decimal;">
That's it! You've now built a custom application & programmed it into the AVR. We haven't yet verified it's working, which is the next step.
==== Communicating from CW-Capture Software ====
Next, open the CW-Capture software. Then perform the following steps: