| As of August 2020 the site you are on (wiki.newae.com) is deprecated, and content is now at rtfm.newae.com. |
Difference between revisions of "Installing ChipWhisperer/Installing ARM Toolchain"
From ChipWhisperer Wiki
| Line 1: | Line 1: | ||
| + | === Installation === | ||
To be able to build firmware for ARM Targets, you'll need to install the GNU Toolchain for ARM Devices. An installer for Windows and archives for Linux/Windows | To be able to build firmware for ARM Targets, you'll need to install the GNU Toolchain for ARM Devices. An installer for Windows and archives for Linux/Windows | ||
can be found [https://developer.arm.com/open-source/gnu-toolchain/gnu-rm/downloads here]. If you use the installer, make sure the "Add path to environment variable", "Add registry information", and "Launch gccvar.bat" boxes are ticked. | can be found [https://developer.arm.com/open-source/gnu-toolchain/gnu-rm/downloads here]. If you use the installer, make sure the "Add path to environment variable", "Add registry information", and "Launch gccvar.bat" boxes are ticked. | ||
| − | If you're using a Linux based operating system (like the VM), you can install the toolchain via your package manager. For example, in the VM run <code>sudo apt-get install gcc-arm-none-eabi</code> in a terminal | + | If you're using a Linux based operating system (like the VM), you can install the toolchain via your package manager. For example, in the VM run <code>sudo apt-get install gcc-arm-none-eabi</code> in a terminal. |
| + | |||
| + | Once you've done this, open a terminal and type <code>arm-none-eabi-gcc</code>. If this fails, you'll need to add the toolchain to your path. | ||
Revision as of 11:59, 27 September 2018
Installation
To be able to build firmware for ARM Targets, you'll need to install the GNU Toolchain for ARM Devices. An installer for Windows and archives for Linux/Windows can be found here. If you use the installer, make sure the "Add path to environment variable", "Add registry information", and "Launch gccvar.bat" boxes are ticked.
If you're using a Linux based operating system (like the VM), you can install the toolchain via your package manager. For example, in the VM run sudo apt-get install gcc-arm-none-eabi in a terminal.
Once you've done this, open a terminal and type arm-none-eabi-gcc. If this fails, you'll need to add the toolchain to your path.
