Changes

Installing ChipWhisperer/Required Tools - Linux

No change in size, 14:47, 1 May 2018
no edit summary
<h2h4> Python </h2h4>
On Linux, installing Python &amp; all the associated packages is straightforward. Typically you can install them from a package manager, if you are using Fedora Core or similar, just type:
</pre>
<h2h4> Getting the AVR Toolchain </h2h4>
Many of the tutorials use the AVR XMEGA microcontrollers as a target. In order to compile code for these targets, you'll need the AVR toolchain. This is easy to set up:
<pre>
</pre>
<h2h4> Hardware Drivers </h2h4>
The ''driver'' for Linux is built in, however you need to allow your user account to access the peripheral. To do so, you'll have to make a file called <code>/etc/udev/rules.d/99-newae.rules</code> . The contents of this file should be:
<h2h4> FTDI Hardware Driver (SASEBO-W, SAKURA-G, SASEBO-GII) </h2h4>
'''This is only required for supporting FTDI-connected hardware''' such as the SASEBO-W, SAKURA-G, SASEBO-GII. This is NOT required for the ChipWhisperer Capture Rev2.