OpenADC Low Frequency Input

Revision as of 08:14, 10 April 2017 by Coflynn (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Revision as of 08:14, 10 April 2017 by Coflynn (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

This is based on the following technical report: A Four Channel Beam Current Monitor Data Acquisition System Using Embedded Processors

You can greatly increase the low-frequency response by adjusting two items:

Change capacitor C33
Remove solder jumper SJ1

See the linked report above for details.

Last modified on 10 April 2017, at 08:14