Changes

CW1200 ChipWhisperer-Pro

1,647 bytes added, 20:16, 15 March 2017
Touchscreen
= Touchscreen =
The touchscreen on the ChipWhisperer Pro shows various details about its status and current settings.
 
== Screen 1: Clock ==
The clock screen shows the status of the CLKGEN and ADC clocks along with the frequency counter.
 
'''TODO: picture'''
* '''CLKGEN''': Current frequency of CLKGEN clock in kHz
** '''Source''': Input to CLKGEN DCM. Could be system clock or EXTCLK
** '''DCM''': Lock status of CLKGEN DCM
** '''Reset DCM''': Reset the CLKGEN output. Useful if clock has locked at the wrong frequency
* '''ADC Clock''': Current ADC sampling rate in kHz
** '''Source''': Input to ADC DCM. Could be related to CLKGEN or EXTCLK
** '''DCM''': Lock status of ADC DCM
** '''Reset DCM''': Reset the ADC clock output
* '''Frequency Counter''': Current frequency measured by the frequency counter
** '''Source''': Input to frequency counter. Could be either EXTCLK or CLKGEN
 
== Screen 2: Routing ==
The routing screen shows the status of the various I/O pins.
 
'''TODO: picture'''
* '''Aux Output''': Status of the aux SMA connections. Could be used as trigger input/output, glitch output, and/or clock output
* '''IO Pins''': Status of each of the IO pins on the 20 pin connector. Possible values depend on pin
* '''Target Power State''': Status of the 3.3 V output. Can be toggled here to reset target
* '''Target HS IO-Out''': Signal connected to high-speed output (HS2). Could be CLKGEN, glitch module, or disabled
 
== Screen 3: Trigger ==
The trigger screen shows the current settings for the trigger module.
 
'''TODO: picture'''
 
== Screen 4: Glitch ==
The glitch screen shows the current settings for the glitch module.
 
'''TODO: picture'''
 
 
- Pictures of screens
- Descriptions of displays
{{Template:Hardware}}
Approved_users
510
edits