Changes

Tutorial B2 Viewing Instruction Power Differences

48 bytes added, 20:06, 22 March 2017
Capturing Power Traces
<li>As the ''Scope Module'', select the ''ChipWhisperer/OpenADC'' option.</li>
<li>As the ''Target Module'', select the ''Simple Serial'' option.</li>
<li>Switch to the ''Target Settings'' tab, and as the ''connection'', select the ''ChipWhisperer'' (for CW1002) or ''ChipWhisperer-LiteNewAE USB (CWLite/CW1200)'' (for CW1173 or CW1180ChipWhisperer Lite/Pro).</li><li>Switch to the ''Scope Settings'' tab, and ensure the ''connection'' is set to either ''ChipWhisperer'' (for CW1002) or ''ChipWhisperer-LiteNewAE USB (CWLite/CW1200)'' (for CW1173 or CW1180ChipWhisperer Lite/Pro).</li>
<li>Run the master connect (click the button labeled ''Master: DIS''). Both the Target &amp; Scope should switch to ''CON'' and be green circles.</li>
<li><p>For the CW1173/CW1180 /Cw1200 (ChipWhisperer-Lite /Pro based systems), perform the following:</p>
<blockquote><ol style="list-style-type: lower-alpha;">
<li>Set the ''CLKGEN'' frequency to ''7.37 MHz''</li>
</blockquote>
<ol start="13" style="list-style-type: decimal;">
<li>For the CW1173/CW1180 /Cw1200 (ChipWhisperer-Lite /Pro based hardware), perform the following:</li></ol>
<blockquote><ol start="4" style="list-style-type: lower-alpha;">
Approved_users
510
edits