Changes

Tutorial A9 Bypassing LPC1114 Read Protect

128 bytes added, 02:33, 12 April 2018
no edit summary
# Connect pin 4 of UEXT (RXD) to pin 12 on the CW-Lite
# Connect RST to pins 5 (nRST) and 14 (GPIO3) or 16 (GPIO4) on the CW-Lite
# Finally, attach an SMA cable between the one you added to the board and the GLITCH connector on the CW-Lite. If you'd like instead you can also use a SMA Tee to do both measurement & glitch. [[File:A9_LPC_CWLITE_Conn.jpg.jpg|600px]]
=== ChipWhisperer-Lite (CW1173) with CW308 Target Board ===
Approved_users, bureaucrat, administrator
1,956
edits