Speed up Capture by Disabling Waveform Redraw
Revision as of 21:43, 10 April 2017 by Coflynn (Talk | contribs) (Created page with "When performing many captures, you can improve speed by disabling waveform redraw. This is done under the "Results" tab, by setting the "Trace Output Plot" option of "Input" t...")
When performing many captures, you can improve speed by disabling waveform redraw. This is done under the "Results" tab, by setting the "Trace Output Plot" option of "Input" to "None":
You can change this option during an active capture, so start the capture to ensure things are working, then turn off the waveform.