458
edits
As of August 2020 the site you are on (wiki.newae.com) is deprecated, and content is now at rtfm.newae.com. |
Changes
no edit summary
The following are specific instructions only for the ChipWhisperer-Lite or -Pro:
#From the Project menu select the Example Scripts and then ChipWhisperer-Lite: AES SimpleSerial on XMEGA# This should connect to the target board & run a few encryptions. You should check the "Encryption Status Manager" along with viewing the resulting power measurement.# Jump to the generic instructions (skip the CWC-Rev2 instructions next).
==== CW-Capture Rev2 Specific Setup ====
== Appendix B-1: Full Attack Script for older (< 3.1.x) ==
Here is the full attack script for older releases:- '''DO NOT attempt to use with a current release (3.1.8 or later)'''.
<pre># Based on Ilya Kizhvatov's work, published as "Side Channel Analysis of AVR XMEGA Crypto Engine"
== Appendix B-2: Full Attack Script for 0.09 or Older Releases ==
Here is the full attack scriptfor VERY old releases:
<pre># Based on Ilya Kizhvatov's work, published as "Side Channel Analysis of AVR XMEGA Crypto Engine"
Atmel and XMEGA are registered trademarks or trademarks of Atmel Corporation or its subsidiaries, in the US and/or other countries.
== Links ==
{{Template:Tutorials}}
[[Category:Tutorials]]