Changes

== Using the Glitch Explorer ==

The last thing we need to do before beginning our glitches is to setup the Glitch Explorer to detect successful glitches. Since the bootloader sends back a specific error message when read protect is enabled, we can use that to tell if our glitch was successful or not. For example, you could search the string for "\r\n19\r\n" for a normal response, and search for "\r\n0\r\n for a successful response. Setup your Acquisition Settings to run for a while, and check back for successful glitches. If you're lucky, you'll find some glitches and can start reading flash memory.