Changes

Tutorial B1 Building a SimpleSerial Project

134 bytes added, 19:06, 22 March 2017
Building the Basic Example
<li><p>Change the terminal to the newly copied directory. For example:</p>
<pre>cd c:\chipwhisperer\hardware\victims\firmware\simpleserial-base-lab1</pre></li>
<li><p>Then , run <code>make</code> to build the system:. Make sure you specify which platform you're using as your target. For example, for the ChipWhisperer Lite target, run</p><pre>makePLATFORM=CW303</pre>
<p>Which should have the following output:</p>
<pre>...Bunch of lines removed...
Approved_users
510
edits