Changes

<blockquote><p>[[File:cw1173_microusb.jpg|image]]</p></blockquote></li><li> The software AES implementation that will run on the target is located in <code>chipwhisperer\hardware\victims\firmware\simpleserial-aes</code>. In a terminal window, navigate here and run the command <code>make</code> to build the firmware.  As in previous tutorials, ensure that the firmware has been built for the correct board. Here, the output of <code>make</code> should end like<par>AVR Memory Usage----------------Device: atxmega128d3 Program: 3078 bytes (2.2% Full)(.text + .data + .bootloader) Data: 352 bytes (4.3% Full)(.data + .bss + .noinit)  Built for platform CW-Lite XMEGA -------- end --------</par>Make sure that the platform is correct.</li> <li> Upload the firmware to the target chip. The process to do this is the same as the previous tutorials:* Open the ChipWhisperer Capture software.* Connect to the ChipWhisperer. (You can do this using a script or by filling out the generic settings and connecting to the board yourself.)* Open the XMEGA Programmer (**Tools > ChipWhisperer-Lite XMEGA Programmer**).* Find the hex file you compiled and program it onto the target.</li></ol>