Changes

Tutorial CW305-1 Building a Project

1 byte removed, 13:26, 18 January 2017
Capture Setup
The first thing we need to do is set up the DIP switches on the CW305. These are the four switches next to the 20-pin connector. We need to set two of them for this project:
* '''J16: 0''' - use the on-board PLL to clock the FPGA
* '''K16: 1''' - route the FPGA's clock to the ChipWhisperer's HS-Out In channel
The other two switches have no effect on the clock routing, so they can be in either position.
Approved_users
510
edits