| As of August 2020 the site you are on (wiki.newae.com) is deprecated, and content is now at rtfm.newae.com. |
V4:CW1173 ChipWhisperer-Lite/XMEGA Programmer
From ChipWhisperer Wiki
< V4:CW1173 ChipWhisperer-Lite
Revision as of 12:06, 12 March 2020 by Adewar (Talk | contribs) (Created page with " The XMEGA device programmer requires only two connections to the target: clock (PDIC) and data (PDID). The PDIC line is usually shared with the RESET pin, and the PDID pin is...")
The XMEGA device programmer requires only two connections to the target: clock (PDIC) and data (PDID). The PDIC line is usually shared with the RESET pin, and the PDID pin is a specific pin on the XMEGA device. See #20-Pin_Connector for details of XMEGA programming pin connections.
