Changes

V5:Installing ChipWhisperer/Required Tools - Windows

46 bytes removed, 17:44, 19 December 2018
no edit summary
Go to your installation directory for WinPython, and run the shortcut called '''WinPython Command Prompt.exe'''. This will give you a command prompt which is setup to run Python along with associated scripts.
''Optional'': You can add the python.exe you just installed to your PATH. To do so navigate to your installation folder, and run the '''WinPython Control Panel.exe''' program. Then select ''Advanced -> Register distribution...''. If you do not do this, you will have to run all commands in this document via the '''WinPython Command Prompt.exe'''. If you plan on running both 32-bit and 64-bit Python, you should not register them. Instead explicitly call the correct Python by always running the '''WinPython Command Prompt.exe''', and then calling specific programs (such as CW Capture scripts or Analyzer) from that command promptnotebooks.
<h4> Python Packages </h4>
Approved_users, administrator
366
edits