Tutorial B11 Breaking RSA

No change in size, 00:11, 16 July 2017
Finding SPA Leakage
And you can see the power trace change drastically, as below:
Finally, let's flip another bit. Change the input plaintext as follows, such that bit #4 in the final bit is set HIGH. We can plot the two power traces on top of each other, and you see that they are differing at a specific point in time:
Walking back from the right, you can see this almost directly matches bit numbering for those last two bytes:
With a bit of setup done, we can now perform a few captures.
Approved_users, bureaucrat, administrator