Installing ChipWhisperer

443 bytes added, 18:33, 13 June 2016
ChipWhisperer Rev2 Capture Hardware Driver
'''NB''': This assumes the python command links to Python-2.7, and not Python-3.x. You may need to specify either python2.7 or python27 as the command instead of python to force this.
=== ChipWhisperer Rev2 Capture Hardware Driver Drivers ===
The ''driver'' for Linux is built in, however you need to allow your user account to access the peripheral. To do so, you'll have to make a file called <code>/etc/udev/rules.d/99-ztexnewae.rules</code> . The contents of this file should be:
<pre># allow users to claim the deviceCW-LiteSUBSYSTEM=="usb", ATTRS{idVendor}=="2b3e", ATTRS{idProduct}=="ace2", MODE="0664", GROUP="plugdev" # CW-1200SUBSYSTEM=="usb", ATTRS{idVendor}=="2b3e", ATTRS{idProduct}=="ace3", MODE="0664", GROUP="plugdev" # CW-305 (Artix Target)SUBSYSTEM=="usb", ATTRS{idVendor}=="2b3e", ATTRS{idProduct}=="c305", MODE="0664", GROUP="plugdev" # CW-CR2
SUBSYSTEM=="usb", ATTRS{idVendor}=="04b4", ATTRS{idProduct}=="8613", MODE="0664", GROUP="plugdev"
SUBSYSTEM=="usb", ATTRS{idVendor}=="221a", ATTRS{idProduct}=="0100", MODE="0664", GROUP="plugdev"</pre>
Then add your username to the plugdev group:
<pre>$ sudo udevadm control --reload-rules</pre>
Finally log out &amp; in again for the group change to take effect.
You can always find the latest version of this file in [ GIT].
=== AVR-USB Programmer ===
Approved_users, bureaucrat, administrator