As of August 2020 the site you are on ( is deprecated, and content is now at

Tutorial CW305-1 Building a Project

From ChipWhisperer Wiki
Revision as of 07:34, 16 January 2017 by Gdeon (Talk | contribs) (Initial page layout)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

The CW305 target is an FPGA target board for use with the ChipWhisperer capture hardware. This board lets you test side channel analysis techniques on an Artix-7 FPGA. With this setup, a different toolchain is required: we won't be building C firmware with a makefile. This tutorial walks through the various steps required to run an AES-128 example on the CW305 target.

Target Firmware

Opening the Project

FPGA Code Layout

Building the Project

Hardware Connections

- USB for configuring target - 20 pin header - Measurement (LNA output)

Capture Setup

- Example script - Upload bitstream - Sample captures