As of August 2020 the site you are on (wiki.newae.com) is deprecated, and content is now at rtfm.newae.com.

CW1173 ChipWhisperer-Lite/Glitch Port

From ChipWhisperer Wiki
Jump to: navigation, search

This section has been recently updated for ChipWhisperer 5. The previous version can be found here: https://wiki.newae.com/V4:CW1173_ChipWhisperer-Lite/XMEGA_Programmer

The "GLITCH" port is used for voltage glitching. It's connected to two MOSFET elements, as the following figure shows:

image

The CW1173 glitch output can be commanded to turn on either of those MOSFETs via scope.io.glitch_hp and scope.io.glitch_lp fields:

scope.io.glitch_hp = True #enable high power glitch
scope.io.glitch_hp = False #disable high power glitch

scope.io.glitch_lp = True #enable low power glitch
scope.io.glitch_lp = False #disable low power glitch

Be careful using this feature, as you don't want to short the MOSFETs for too long. It's also possible to damage the ChipWhisperer-Lite by burning these MOSFETs up if used incorrectly. See tutorial Fault_2 (https://chipwhisperer.readthedocs.io/en/latest/tutorials/fault_2-openadc-cwlitearm.html#tutorial-fault-2-openadc-cwlitearm) for more information.