Approved_users
510
edits
| As of August 2020 the site you are on (wiki.newae.com) is deprecated, and content is now at rtfm.newae.com. |
Changes
→Developing Firmware for the 87C51
}
</pre>
'''Simulator''': The 87C51 is one-time programmable, so it is extremely helpful to have a simulator to test firmware before burning it onto a physical processor. There are very few free simulators for the 8051 core. One free sim is [http://www.edsim51.com/ EdSim51]. This program can load a hex file and run the code one step at a time. There are a few big issues:
* The simulator has no way of translating your compiled binary file back into C. This means that the debugging process is a bit blind - moving through the program one line at a time isn't particularly helpful because one line of C will typically be many lines of assembly. It's still possible to debug code by printing variables, but this leaves something to be desired.
* EdSim51 is designed for an 8051 core with 128 B of RAM. This means that you cannot simulate any programs that use more than 128 B of RAM. However, this is enough space for a lot of tasks - our full piece of firmware does AES over SimpleSerial in this much space!
'''Programmer''': To write a program into the code EPROM, an EPROM programmer is needed. We used a [http://minipro.txt.si/index.php?title=Main_Page MiniPro TL866 programmer] along with their free software. However, any programmer compatible with the 87C51 should be fine.
== Default Firmware ==
