Approved_users, bureaucrat, administrator
1,956
edits
| As of August 2020 the site you are on (wiki.newae.com) is deprecated, and content is now at rtfm.newae.com. |
Changes
→Usage
== Usage ==
If using the board, you MUST wire the I/O voltage to the VREF pin (i.e., 3.3V). If you fail to do this the diode clamps may stop I/O lines from being drivable.
See the example photos below where you can see the 3.3V routed to the VREF pin.
== Examples ==
