Changes

[[File:SASEBO-W.jpg|800px]]

The SASEBO-W must be prepared for use with the ChipWhisperer system. This requires a few steps:

<p>[[File:ft245fifo.png|image]]</p></li></ol>

The SASEBO-W example assumes you are using the SASEBO-W CardOS, and attacking the AES implementation. In this case:

See the Tutorial_B10_Using_with_SASEBO-W_CardOS_or_DPA_Contest_v4.2 for details, including using different target boards.

Additional information is currently posted on the ChipWhisperer Wiki at these pages:

* Tutorial_B10_Using_with_SASEBO-W_CardOS_or_DPA_Contest_v4.2

<blockquote>'''warning'''

[[File:sasebow_scardfake.jpg|image]]

Connections to the AtMega328P are shown in the following table:

Note this means code written for the Mega163 card will require minor changes to run on the AtMega328P.

The quick-start guide for the SASEBO-W includes details of using the 'avrdude' program to program the MegaCard. This will also work for the AtMega328P, it simply requires you to change the device on the command line to 'mega328p'.