Changes

<ol style="list-style-type[[File: decimal;"><li>Close &amp; reopen the capture software (to clear out any previous connection which may be invalid)cwsetup_scriptselection.</li>png|889x889px]]<li><p>From # Switch to the ''Project'' menu elect the ''Example ScriptsPython Console'' tab.# The script selection window (2) lists available example scripts. Scroll down to "connect_cwlite_simpleserial.py" and then ''ChipWhisperer-Lite: AES SimpleSerial click on XMEGA'' (make sure you don't select it.# You will see the &quot;SPA&quot; examplescript contents appear in the "Script Preview" window (3). You can either hit the "Run" button or double-click the filename of the script to execute it. Do either of those now. The window should change to indicate the connect succeeded:</p><p>[[File:runscript_cw1173xmegacwsetup_scriptselection_cwliterun.png|image889x889px]]</p></li>  <li><pol start="4"># The console lists the exact script will automatically connect to that is executed. Note you could have manually executed the capture hardware script commands line-by-line in this console.# The "Scope" and run 2 example traces"Target" buttons will show as connected. You should see something that looks like the following screen:# The Status Bar will show a connection.</pol><p>Note in previous software versions, this tutorial took you through manual setup. This can still be done (using the GUI), but instead now the API has been made more powerful, so the example configuration script will be used instead. To do so, simply scroll down and select the "setup_cwlite_xmega_aes.py" file: [[File:capture_cw1173xmegacwsetup_scriptselection_xmegaconfig_cwliterun.png|image]]</p>