Approved_users, bureaucrat, administrator
1,956
edits
| As of August 2020 the site you are on (wiki.newae.com) is deprecated, and content is now at rtfm.newae.com. |
Changes
→Trace Capture Instructions
#Switch from software to hardware crypto. To do this you'll have to change the <code>makefile</code> for the project.
#: In the makefile, add a define for <code>HWCRYPTO=1</code>:#: <code>#Multi-Target Board, XMEGA DevicePLATFORM = CW301_XMEGA#Optional - use hardware cryptoCDEFS += -DHWCRYPTO=1</code>#Build a new hex-file, and program the file in.#Run a few 'capture 1' traces, and confirm (using the Encryption Status Manager) that the encryption was successful.
#Finally, set the offset to 1500, and number of samples to only 1000:
#:[[File:slength.png|image]]
