Search results

Create the page "Serial Terminal" on this wiki! See also the search results found.

• V3:Tutorial B3-1 Timing Analysis with Power for Password Bypass
  <li><p>Select ''Tools --> Terminal'', and press ''Connect''. You should see a window such as this:</p> ...the signature read operation. You should see some messages come across the terminal emulator window:</p>
  27 KB (4,012 words) - 14:01, 24 September 2017
• V3:Tutorial A3 VCC Glitch Attacks
  <li>As the ''Target Module'', select the ''Simple Serial'' option</li> <li><p>Connect the Serial Port</p>
  23 KB (3,717 words) - 16:16, 24 September 2017
• V4:Tutorial B1 Building a SimpleSerial Project
  ...ed on most systems. This system communicates using a standard asynchronous serial protocol, 38400 baud, 8-N-1. .... This allows you to interact with the simpleserial system over a standard terminal emulator.
  7 KB (1,067 words) - 06:02, 29 July 2019
• V3:Tutorial B3-2 Timing Analysis with Power for Attacking TSB
  == Testing the Serial Connection & Observing Power == #As the ''Target Module'', select the ''Simple Serial'' option
  26 KB (4,167 words) - 15:22, 17 September 2017
• V4:CW1173 ChipWhisperer-Lite/Upgrading SAM3U Firmware
  <pre>Found CW-Lite, Serial Number = 442031204630xxxxxxxxxxx This indicates it is in bootloader mode. The device will now attach as a serial port. If you are using Windows this may take a few minutes to happen.
  4 KB (737 words) - 12:29, 12 March 2020
• V3:Tutorial A7 Glitch Buffer Attacks
  ...together, embedded firmware usually fills up a buffer with data and lets a serial driver print on its own time. This setup means we can expect to see code li # We send the encrypted image ciphertexts over a serial connection
  16 KB (2,392 words) - 20:05, 5 November 2017
• CW-Capture Tool
  * Serial Terminal # Select the desired "Target Module" (e.g., Simple Serial). Leave it as None if you only want to use the scope.
  5 KB (844 words) - 06:33, 24 August 2023
• CW1173 ChipWhisperer-Lite/Upgrading SAM3U Firmware
  <pre>Found CW-Lite, Serial Number = 442031204630xxxxxxxxxxx ...e is an issue in some versions of Linux, where the SAM3U is not assigned a serial port when it enters bootloader mode. Here are some steps to resolve this is
  3 KB (430 words) - 12:33, 12 March 2020
• Installing ChipWhisperer/Required Tools - Windows
  <p><code>cd</code> to the directory with the avr-serial example, and run <code>make</code>:</p> ...le. This will configure the path for just that terminal, rather than every terminal you open.
  7 KB (1,170 words) - 07:06, 31 May 2019
• V3:Tutorial B1 Building a SimpleSerial Project
  ...ted on most systems. This system communicates using a standard asyncronous serial protocol, 38400 baud, 8-N-1. .... This allows you to interact with the simpleserial system over a standard terminal emulator.
  8 KB (1,132 words) - 13:22, 17 September 2017
• V3:Tutorial B2 Viewing Instruction Power Differences
  <li><p>Change the terminal to the directory with your source, and run <code>make</code> to build the s ...er ''Generic Settings'' tab, as the ''Target Module'', select the ''Simple Serial'' option.</li>
  16 KB (2,440 words) - 15:03, 17 September 2017
• V3:Tutorial A2 Introduction to Glitch Attacks (including Glitch Explorer)
  <li>As the ''Target Module'', select the ''Simple Serial'' option</li> ..., and as the ''connection'', select the ''NewAE USB (CWLite/CW1200)'' or ''Serial Port (LX9)'' option</li>
  41 KB (6,684 words) - 16:56, 24 September 2017
• V3:Tutorial A5 Breaking AES-256 Bootloader
  ...The bootloader receives information from a communication line (a USB port, serial port, ethernet port, WiFi connection, etc...) and stores this data into pro ...k with a simple AES-256 bootloader. The victim will receive data through a serial connection, decrypt the command, and confirm that the included signature is
  39 KB (5,500 words) - 15:49, 4 November 2017
• V3:Making Scripts
  ...self.api.setParameter(['Generic Settings', 'Target Module', 'Simple Serial']) self.api.setParameter(['Simple Serial', 'Connection', 'ChipWhisperer-Lite'])
  6 KB (764 words) - 20:21, 20 February 2018
• V4:Tutorial A7 Glitch Buffer Attacks
  ...together, embedded firmware usually fills up a buffer with data and lets a serial driver print on its own time. This setup means we can expect to see code li # We send the encrypted image ciphertexts over a serial connection
  18 KB (2,877 words) - 06:37, 29 July 2019
• CW4
  ** [[Serial Terminal]]
  1 KB (149 words) - 08:17, 29 July 2019
• V4:Main Page
  ** [[Serial Terminal]]
  8 KB (1,162 words) - 08:22, 29 July 2019
• V4:Tutorial A5 Breaking AES-256 Bootloader
  ...The bootloader receives information from a communication line (a USB port, serial port, ethernet port, WiFi connection, etc...) and stores this data into pro ...k with a simple AES-256 bootloader. The victim will receive data through a serial connection, decrypt the command, and confirm that the included signature is
  31 KB (4,626 words) - 06:32, 29 July 2019
• V5:Installing ChipWhisperer/Required Tools - Windows
  <p><code>cd</code> to the directory with the avr-serial example, and run <code>make</code>:</p> ...le. This will configure the path for just that terminal, rather than every terminal you open.
  6 KB (1,003 words) - 14:04, 16 November 2018
• V5:Installing ChipWhisperer/Required Tools - Windows
  <p><code>cd</code> to the directory with the avr-serial example, and run <code>make</code>:</p> ...le. This will configure the path for just that terminal, rather than every terminal you open.
  7 KB (1,118 words) - 07:44, 14 May 2019

View (previous 20 | next 20) (20 | 50 | 100 | 250 | 500)