As of August 2020 the site you are on (wiki.newae.com) is deprecated, and content is now at rtfm.newae.com.

Difference between revisions of "Tutorial B7 Profiling Attacks (with HW Assumption)"

From ChipWhisperer Wiki
Jump to: navigation, search
m
(14 intermediate revisions by one other user not shown)
Line 30: Line 30:
 
=== Capturing the Attack Traces ===
 
=== Capturing the Attack Traces ===
  
# Make a new project. Leave the ''Key/Text Pattern'' as Basic, where the encryption key is fixed and the plaintext is random.
+
# Make a new project (File->New).
 +
# Change the encryption key to fixed.
 
# Save the project now in the same directory as the <code>.cwp</code> file from the previous section, giving it a name indicating the key is '''fixed''' and text is '''random'''. For example you could call it <code>tut_fixedkey_randplain.cwp</code>, again saving it in the same directory as the previous file.
 
# Save the project now in the same directory as the <code>.cwp</code> file from the previous section, giving it a name indicating the key is '''fixed''' and text is '''random'''. For example you could call it <code>tut_fixedkey_randplain.cwp</code>, again saving it in the same directory as the previous file.
 
# Change the number of traces to be ''20'': by comparison the profiling attack will require less attack traces compared to the CPA attack.
 
# Change the number of traces to be ''20'': by comparison the profiling attack will require less attack traces compared to the CPA attack.
 
# Hit the ''Capture Many'' button (M in a green triangle) to start the capture process. You will see each new trace plotted in the waveform display. Once the capture is complete, save the project file again.
 
# Hit the ''Capture Many'' button (M in a green triangle) to start the capture process. You will see each new trace plotted in the waveform display. Once the capture is complete, save the project file again.
# Exit the capture application, again being sure to first save the project.
+
# Exit the capture application.
  
 
== Generating the Template ==
 
== Generating the Template ==
Line 43: Line 44:
 
<li>Open the Analyzer software</li>
 
<li>Open the Analyzer software</li>
 
<li>From the ''File --&gt; Open Project'' option, navigate to the <code>tut_randkey_randplain.cwp</code> file you save previously. Open this file, ensure it is the file corresponding with the '''randomly changing encryption key'''!</li>
 
<li>From the ''File --&gt; Open Project'' option, navigate to the <code>tut_randkey_randplain.cwp</code> file you save previously. Open this file, ensure it is the file corresponding with the '''randomly changing encryption key'''!</li>
<li>Open the ''Trace Explorer'' by selecting it from the ''Tools'' menu.</li>
+
<li>Open the ''Trace Explorer'' tab and Enable it.</li>
<li><p>Change the ''Partition Mode'' to ''HW AES Intermediate'', and select the ''Auto-Save Data to Project'' option:</p>
+
<li><p>Change the "Comparison Mode" to "Sum of Absolute Difference", the ''Partition Mode'' to ''HW AES Intermediate'', and select the ''Auto-Save Data to Project'' option:</p>
 
<p>[[File:traceexplorer1.png|image]]</p></li>
 
<p>[[File:traceexplorer1.png|image]]</p></li>
 
<li><p>Hit the ''Display'' button, and then select ''All On''. This displays the differences between the various groups of Hamming Weight (HW) values:</p>
 
<li><p>Hit the ''Display'' button, and then select ''All On''. This displays the differences between the various groups of Hamming Weight (HW) values:</p>
Line 59: Line 60:
 
</blockquote>
 
</blockquote>
 
<ol start="7" style="list-style-type: decimal;">
 
<ol start="7" style="list-style-type: decimal;">
<li>Close the Trace Explorer window</li>
+
<li>Disable the Trace Explorer.</li>
 
<li><p>Change the attack module to ''Profiling'':</p>
 
<li><p>Change the attack module to ''Profiling'':</p>
 
<p>[[File:selectprofiling.png|image]]</p></li>
 
<p>[[File:selectprofiling.png|image]]</p></li>
<li><p>Go to the ''Template Generation'' section, and ensure you select the appropriate trace range (0-999 in this example). Select the ''TraceExplorer Table'' as the POI source, since we had just populated this with a valid POI data. Notice that if you view the analysis script it will list the poi you selected, if not hit the ''Read POI'' button:</p>
+
<li><p>Go to the ''Template Generation'' section in the Attack tab, and ensure you select the appropriate trace range (0-999 in this example). Select the ''TraceExplorer Table'' as the POI source, since we had just populated this with a valid POI data. Notice that if you view the analysis script it will list the poi you selected, if not hit the ''Read POI'' button:</p>
 
<p>[[File:templategeneration.png|image]]</p></li>
 
<p>[[File:templategeneration.png|image]]</p></li>
 
<li>Click the ''Generate Templates'' button. This will dynamically load and run the <code>def generateTemplates(self):</code> function in the scripting window.</li>
 
<li>Click the ''Generate Templates'' button. This will dynamically load and run the <code>def generateTemplates(self):</code> function in the scripting window.</li>
Line 74: Line 75:
 
partitiontype = PartitionHWIntermediate
 
partitiontype = PartitionHWIntermediate
 
filename = avr_keyrand_plainrand_1000traces_data\analysis\templates-PartitionHWIntermediate-0-999.npz</pre></li>
 
filename = avr_keyrand_plainrand_1000traces_data\analysis\templates-PartitionHWIntermediate-0-999.npz</pre></li>
<li>Close the Analyzer software, as we will now apply this template.</li></ol>
+
</ol>
  
 
== Applying the Template ==
 
== Applying the Template ==
  
 
<ol style="list-style-type: decimal;">
 
<ol style="list-style-type: decimal;">
<li>Open the Analyzer software (NB: be sure to open a new window, do not re-use a previous instance)</li>
 
 
<li>From the ''File --&gt; Open Project'' option, navigate to the <code>tut_fixedkey_randplain.cwp</code> file you save previously. Open this file, ensure it is the file corresponding with the '''fixed encryption key'''!</li>
 
<li>From the ''File --&gt; Open Project'' option, navigate to the <code>tut_fixedkey_randplain.cwp</code> file you save previously. Open this file, ensure it is the file corresponding with the '''fixed encryption key'''!</li>
 
<li>Open the project text editor if not already open.</li>
 
<li>Open the project text editor if not already open.</li>
 
<li><p>Append the ''Template Data'' section you copied from the previous project to your project file:</p>
 
<li><p>Append the ''Template Data'' section you copied from the previous project to your project file:</p>
 
<p>[[File:projecteditor_addtemplate.png|image]]</p></li>
 
<p>[[File:projecteditor_addtemplate.png|image]]</p></li>
<li>Use the ''Save Editor to Disk'' button to write these changes. Note this assumes that both the <code>tut_fixedkey_randplain.cwp</code> and <code>tut_randkey_randplain.cwp</code> were saved in the same directory, as otherwise the reference to the template file will break!</li>
+
<li>Use the ''Save Editor to Disk'' button to write these changes (and '''not the Save Project option'''). Note this assumes that both the <code>tut_fixedkey_randplain.cwp</code> and <code>tut_randkey_randplain.cwp</code> were saved in the same directory, as otherwise the reference to the template file will break!</li>
<li>Close the Analyzer software. Re-open the software and reload the same project file (e.g. <code>tut_fixedkey_randplain.cwp</code>), this step is needed to ensure the changes you added in are loaded into memory.</li>
+
<li>Re-open the same project file (e.g. <code>tut_fixedkey_randplain.cwp</code>), this step is needed to ensure the changes you added in are loaded into memory.</li>
 
<li><p>Change the attack module to ''Profiling'':</p>
 
<li><p>Change the attack module to ''Profiling'':</p>
 
<p>[[File:selectprofiling.png|image]]</p></li>
 
<p>[[File:selectprofiling.png|image]]</p></li>
Line 92: Line 92:
 
<li><p>Press the ''Attack'' button. Observe that with only a few traces you are able to determine the encryption key:</p>
 
<li><p>Press the ''Attack'' button. Observe that with only a few traces you are able to determine the encryption key:</p>
 
<p>[[File:attack_working.png|image]]</p></li></ol>
 
<p>[[File:attack_working.png|image]]</p></li></ol>
 +
 +
== Links ==
  
 
{{Template:Tutorials}}
 
{{Template:Tutorials}}
 
[[Category:Tutorials]]
 
[[Category:Tutorials]]

Revision as of 11:46, 1 May 2018

This tutorial will demonstrate how to perform a profiling attack against the same AES implementation we've been using. To begin with we'll be using the same Hamming Weight (HW) assumption as previous attacks, although later we'll look into an attack without such assumptions.

Under this assumption, we are attempting to accurately determine the what leakage corresponds to the Hamming Weight of the sensitive value being targeted. This requires us to have similar knowledge to the CPA attack, mainly we are making an assumption that the system does indeed leak the Hamming Weight (HW).

Note that unlike the previous attack, we will require two acquisition campaigns. We must first create a template, which means we'll need a system which we control (or at least know the key for). In real life this would typically mean using another copy of the protected device; e.g. you have a protected device, but you buy another copy which you control. We use the copy we control to characterize the leakage, before applying what we have learned onto the real device with an unknown key.

Setting up the Hardware and Software

In this tutorial, we'll be attacking AES-128 on the same devices we've worked with in previous tutorials. Take a look at Tutorial B5 Breaking AES (Straightforward) for details on how to set everything up.

Capturing the Traces

Capturing the Template Traces

As mentioned, you will need to perform two capture campaigns. This tutorial uses a simple script that ships with the ChipWhisperer Capture software as the building block. The easiest method of accomplishing the trace capture is as follows:

  1. Close & reopen the capture software (to clear out any previous connection which may be invalid).
  2. From the Project menu elect the Example Scripts and then ChipWhisperer-Rev2: SimpleSerial Target

    image

  3. The script will automatically connect to the capture hardware and run 2 example traces. You should see something that looks like the following screen:

    image

  4. Change to the General Settings tab, and adjust the Key/Text Pattern to send a random encryption key along with a random plaintext. This is shown in the following diagram:

    image

  5. Save the project now, giving it a name indicating the key and text is random. For example you could call it tut_randkey_randplain.cwp. Note by saving the project before running the capture you will force all trace data to be saved into a directory with the same name. This will make it easier to find the data at a later time.
  6. Change the number of traces to be 1000: more traces are needed to form the profile. In this case 1000 is a very small capture, however for this unprotected implementation will be sufficient. An interesting experiment is to see how using more or less traces impacts your templates!
  7. Hit the Capture Many button (M in a green triangle) to start the capture process. You will see each new trace plotted in the waveform display. Once the capture is complete, save the project file again.

Capturing the Attack Traces

  1. Make a new project (File->New).
  2. Change the encryption key to fixed.
  3. Save the project now in the same directory as the .cwp file from the previous section, giving it a name indicating the key is fixed and text is random. For example you could call it tut_fixedkey_randplain.cwp, again saving it in the same directory as the previous file.
  4. Change the number of traces to be 20: by comparison the profiling attack will require less attack traces compared to the CPA attack.
  5. Hit the Capture Many button (M in a green triangle) to start the capture process. You will see each new trace plotted in the waveform display. Once the capture is complete, save the project file again.
  6. Exit the capture application.

Generating the Template

The first step in the attack is to generate the template. Again for generating the template this typically requires access to a system almost identical to the device being attacked. It is assumed that the actual device differs from the device being attacked, but in our example we'll be using the same device.

  1. Open the Analyzer software
  2. From the File --> Open Project option, navigate to the tut_randkey_randplain.cwp file you save previously. Open this file, ensure it is the file corresponding with the randomly changing encryption key!
  3. Open the Trace Explorer tab and Enable it.
  4. Change the "Comparison Mode" to "Sum of Absolute Difference", the Partition Mode to HW AES Intermediate, and select the Auto-Save Data to Project option:

    image

  5. Hit the Display button, and then select All On. This displays the differences between the various groups of Hamming Weight (HW) values:

    image

  6. We now want to figure out the Points of Interest (POI), which we will use for our template. Hit the Open POI Table and perform the following:

    1. Set the Num POI/Subkey to 3
    2. Set the Min Spacing between POI to 5
    3. Click the Recalc POI Values button
    4. Click the Set as POI in Project button
image
  1. Disable the Trace Explorer.
  2. Change the attack module to Profiling:

    image

  3. Go to the Template Generation section in the Attack tab, and ensure you select the appropriate trace range (0-999 in this example). Select the TraceExplorer Table as the POI source, since we had just populated this with a valid POI data. Notice that if you view the analysis script it will list the poi you selected, if not hit the Read POI button:

    image

  4. Click the Generate Templates button. This will dynamically load and run the def generateTemplates(self): function in the scripting window.
  5. Save the project file, which will save the location of the template file. We need to copy this information over to our second project, which is the traces we actually plan on attacking.
  6. From the Project menu select the Project File Editor (text), which gives you access to the raw project file. You will have to hit the Reload Editor from Disk button, which reads the changes you just saved into this special text editor. For more information on the project file editor see XREF TODO.
  7. Scroll down until you find a section titled [Template Data 0001 - Templates]. Note the number may change (e.g. 0002, etc), just use the largest number which will be the most recent saved change. Copy this section to a text editor, it will look something like this:

    [Template Data 0001 - Templates]
    tracestart = 0
    traceend = 999
    poi = "[38, 30, 2290]", "[138, 1658, 1650]", "[2134, 238, 2402]", "[338, 2618, 2626]", "[438, 430, 2766]", "[1806, 538, 1690]", "[638, 2174, 2462]", "[738, 2886, 2658]", "[838, 830, 2282]", "[938, 1722, 1858]", "[2290, 1038, 2206]", "[1138, 2690, 2946]", "[1238, 1650, 1798]", "[1338, 1918, 1754]", "[1438, 2342, 2238]", "[2774, 1538, 2722]"
    partitiontype = PartitionHWIntermediate
    filename = avr_keyrand_plainrand_1000traces_data\analysis\templates-PartitionHWIntermediate-0-999.npz

Applying the Template

  1. From the File --> Open Project option, navigate to the tut_fixedkey_randplain.cwp file you save previously. Open this file, ensure it is the file corresponding with the fixed encryption key!
  2. Open the project text editor if not already open.
  3. Append the Template Data section you copied from the previous project to your project file:

    image

  4. Use the Save Editor to Disk button to write these changes (and not the Save Project option). Note this assumes that both the tut_fixedkey_randplain.cwp and tut_randkey_randplain.cwp were saved in the same directory, as otherwise the reference to the template file will break!
  5. Re-open the same project file (e.g. tut_fixedkey_randplain.cwp), this step is needed to ensure the changes you added in are loaded into memory.
  6. Change the attack module to Profiling:

    image

  7. Change the Reporting Interval to 1, since we want to observe what happens on each added trace:

    image

  8. Press the Attack button. Observe that with only a few traces you are able to determine the encryption key:

    image

Links