This shows an extreme example of mounting a board onto the victim board. The actual analysis was being done on the SAMR21R on the main board, but this provided mechanical stability to allow tacking wires onto that area.
[[File:P1090112.jpg|400px]]
[[File:huebridge2.JPG|400px]]
The SPI traffic was wired out as well in this example, and a ChipWhisperer-Pro was used to trigger on SPI traffic.
[[File:P1090114.jpg|400px]]
[[File:huebulb_m2564rfr2.jpg|400px]]
This example allowed both power analysis and clock glitching to be performed against the board. A small shunt resistor is soldered in-line for the VCC pin.
[[File:P1090112.jpg|400px]]
[[File:riscure_ctf.jpg|400px]]
[[Category: CW308 Targets]]
[[Category: Real Targets]]