Changes

== IO Connections == The board contains a number of additional headers. === GPIO Header === A 40-pin header is mounted at JP3. This female header also comes with a dual-sided male 40-pin header which ships which each PCB, allowing you to use either gender of connectors with this header. The pinout of the header is marked on the PCB. All pins are routed to 3.3V VCC-IO banks on the Artix 7 FPGA. The layout of the header is such that the following can directly be plugged into the board: * Digilent Inc PMOD devices  * NewAE OpenADC Module === 20-Pin ChipWhisperer Connector === The bottom right side of the PCB contains a 20-pin connector that follows the standard ChipWhisperer pinout. === LEDs === === SMA Connectors === === Switches ===