Approved_users, bureaucrat, administrator
1,956
edits
| As of August 2020 the site you are on (wiki.newae.com) is deprecated, and content is now at rtfm.newae.com. |
Changes
→Example Project
== Example Project ==
The GIT repo includes an example Xilinx ISE project, located at [https://github.com/newaetech/chipwhisperer/tree/develop/hardware/victims/cw308_ufo_target/spartan6lx9/ss_aes_ise hardware/victims/cw308_ufo_target/spartan6lx9/ss_aes_ise].To use this project: 1. Build the bitstream (or see the pre-built one in the repo)2. Use settings as in the 'Default XMEGA' or 'STM32Fx' targets (i.e., clock jumpers, etc).3. Ensure you have turned on the 1.8V & 3.3V power supplies to the UFO target.4. Program the bitstream into the FPGA using a programming tool.5. Run the 'XMEGA Simple-Serial' script in ChipWhisperer-Capture. This will setup clocks, serial data format, etc as expected.6. Adjust the trigger offset settings - they should be changed to around ~750, and you can reduce the number of data points to ~128. The waveform should look something like this: <TODO>
{{Warningbox|There appears to be occasional jitter on the default AES core, so you might need to use re-synchronization on the power traces. See the [https://github.com/newaetech/chipwhisperer/issues/72 GITHub issue track].}}
