Changes

This shows an extreme example of mounting a board onto the victim board. The actual analysis was being done on the SAMR21R on the main board, but this provided mechanical stability to allow tacking wires onto that area.

[[File:huebridge2.JPG|400px]]

The SPI traffic was wired out as well in this example, and a ChipWhisperer-Pro was used to trigger on SPI traffic.

[[File:huebulb_m2564rfr2.jpg|400px]]

This example allowed both power analysis and clock glitching to be performed against the board. A small shunt resistor is soldered in-line for the VCC pin.

[[File:riscure_ctf.jpg|400px]]

[[Category: CW308 Targets]]