Approved_users, bureaucrat, administrator
1,956
edits
| As of August 2020 the site you are on (wiki.newae.com) is deprecated, and content is now at rtfm.newae.com. |
Changes
→Example Project
1. Build the bitstream (or see the pre-built one in the repo)
2. Use settings as in the 'Default XMEGA' or 'STM32Fx' targets (i.e., clock jumpers, etc).
3. Ensure you have turned on the 1.8V & 3.3V power supplies to the UFO target.
4. Program the bitstream into the FPGA using a programming tool.
5. Run the 'XMEGA Simple-Serial' script in ChipWhisperer-Capture. This will setup clocks, serial data format, etc as expected.
6. Adjust the trigger offset settings - they should be changed to around ~750, and you can reduce the number of data points to ~128.
