As of August 2020 the site you are on (wiki.newae.com) is deprecated, and content is now at rtfm.newae.com.

Changes

Jump to: navigation, search

CW308T-S6LX9

No change in size, 16:28, 5 October 2017
Example Project
# Build the bitstream (or see the pre-built one in the repo at [https://github.com/newaetech/chipwhisperer/raw/develop/hardware/victims/cw308_ufo_target/spartan6lx9/ss_aes_ise/cw308t_s6lx9_example.bit cw308t_s6lx9_example.bit])
# Use settings as in the 'Default XMEGA' or 'STM32Fx' targets (i.e., clock jumpers, etc).
# Ensure you have turned on the 1.8V 2V & 3.3V power supplies to the UFO target.
# Program the bitstream into the FPGA using a programming tool such as Xilinx Impact + USB Programmer cable.
# Run the 'XMEGA Simple-Serial' script in ChipWhisperer-Capture. This will setup clocks, serial data format, etc as expected.
Approved_users, bureaucrat, administrator
1,956
edits

Navigation menu